Bien

Good value for a pack this size. I needed a low‑grit disc to smooth some wide boards that couldn’t go through the planer, and these handled it without clogging or burning. They remove material at a pretty good pace while not getting oit of control. They were especially useful for knocking down some very rough glue joints on the underside of a table top and saved me a fair bit of hand‑planing. They fit my 6 inch sander properly, and the larger surface area makes the work go much faster than my 5 inch setup. The hole pattern allowed my dust collection to work effectively too. They held up well and worked consistently across the whole project. Solid buy.

Great performance. I am sanding the old non-skid off of the deck of a sailboat. It is tough stuff. Using a Festool 150 sander. These disks last longer than others I have tried, and are a great value. I originally ordered a few brands, and just re-ordered these. They out-perform and are a better value than the others I have tried. Great product. Very happy with them.

Used to sand down body filler. Sandpaper did not load up and grit lasted a good amount of time before needing to change. Comes with perforations to fit standard long board but can easily be cut to fit any size board. Hook and loop worked perfectly.

Superior polishing pads, The hook and loop fasteners are effective and hold extremely well. The abrasive particles are sharp and make short work of polishing the surface. The abrasive lasts reasonable well I do not find loose particles on the surface so they are firmly attached. I have used these on painted and clear coated surfaces they are efficient. I have used these on plastic head lights they are effective and do a good job. I have also used them to polish resin surfaces in my wood working also for turned pens. These are very good polishing pads.

These 6-inch foam sanding discs are a solid option for anyone needing a very fine 3000 grit finish on automotive paint, wood, or other delicate surfaces. They worked without issue on my DeWalt orbital sander.

Fit and Compatibility: The 6-inch size fits standard orbital sanders, including my DeWalt model, with no alignment problems. The hook and loop backing attaches securely to the sander pad and holds well during use, with no slipping or spinning off.

Design and Material: The foam backing is the standout feature here. Unlike standard paper discs, the foam layer provides some give and conforms better to curved or uneven surfaces. This makes them particularly useful for automotive bodywork or sanding contoured wood pieces where a rigid disc might dig in or miss spots. The 3000 grit is extremely fine, intended for ultra-smooth finishing or polishing between coats rather than heavy material removal.

I ordered the sandpaper for the very specific project of refinishing my wood staircase. I need a lot of 40 grit paper for the first pass. I absolutely love this paper because it comes on a roll. This is the first time I’ve had sandpaper that comes in a roll and it’s so much more convenient. It is also pre-cut to fit on sanding blocks like the ones I prefer to use. This is the exact width and so you peel back the film and stick it right onto the block. Talk about convenient. Of course you can just cut off a piece and use it with nothing for small projects.

In terms of performance, I’m really happy with it. It is exactly what I expected from a 40 grit roughness. Does a good rough sanding. I find that it does not wear off or wear away too quickly— I get a good amount of use out of each piece that I’ve cut off so far.

I’m really happy with this and I absolutely love using the role versus loose papers. I would definitely re-order this product.

I am using these to strip down a car in preparation for paint. They are of excellent quality; the hook and loop system holds these tight and the holes are in the correct place for my vacuum orbital sander to efficiently remove the dust. They seem to hold their grit for a long time and don’t seem to clog more than other brands. I would definitely recommend this product.

Great performance. I am sanding the old non-skid off of the deck of a sailboat. It is tough stuff. Using a Festool 150 sander.
These disks last longer than others I have tried, and are a great value. I originally ordered a few brands, and just re-ordered these. They out-perform and are a better value than the others I have tried. Great product. Very happy with them.

The paper fit up perfectly to my Makita sander, I used the 80 grit on some body work. I was able to get the smooth even finish just like I was expecting. This was the last step in sanding after doing some welding and I like the 6” sander to get a larger flat area over using the grinder alone.

Seem to work very well compared to Tri****. I'll update after I compare some more but so far so good!

I do industry work and put sandpaper to the test this is a good product cuts great and fast